Firemac 2000
A selection of documents available for immediate download are located here, click the relevant thumbnail to access.
Introduction
The Firemac 2000 is a flap type roof mounted natural Smoke & Fire Ventilator suitable for smoke and heat release, with the option for day-to-day environmental use if required.
Various options are available within the range providing flexibility and choice for the designer and customer. These include unsulated and uninsulated versions along with units incorporating translucent polycarbonate tops for providing natural daylight. A further option is for units to be thermally broken on either (or both) the body and the lid top frames.Product Testing
Full independent product testing including opening mechanism, operational reliability, wind load, aerodynamic efficiency, mechanical integrity, environmental & fire performance all conforming & certified to EN 12101-2 specification.
Aerodynamic coefficient:-
0.60 for units 1000mm x 1000mm - < 2000mm x 2000mm or,
0.65 for units 2000mm x 2000mm & greater (refer to brochure above).
Ventilator body in the following formats:-
|
|
|
| Brochure | Specification | Fixing Instructions & Details for manufacture |
Introduction
The Firemac 2000 is a flap type roof mounted natural Smoke & Fire Ventilator suitable for smoke and heat release, with the option for day-to-day environmental use if required.Various options are available within the range providing flexibility and choice for the designer and customer. These include unsulated and uninsulated versions along with units incorporating translucent polycarbonate tops for providing natural daylight. A further option is for units to be thermally broken on either (or both) the body and the lid top frames.
Application
The variety of options and low profile appearance make the Firemac 2000 suitable for industrial buildings, shopping centres and atria. Smoke exhaust from stairwells is an ideal application for this unit.Product Testing
Full independent product testing including opening mechanism, operational reliability, wind load, aerodynamic efficiency, mechanical integrity, environmental & fire performance all conforming & certified to EN 12101-2 specification.
Aerodynamic coefficient:-
0.60 for units 1000mm x 1000mm - < 2000mm x 2000mm or,
0.65 for units 2000mm x 2000mm & greater (refer to brochure above).
Sizes
With single and twin flaps on offer, units are available in throat sizes ranging from 1000mm x 1000mm, up to 2500mm x 2500mm as standard.Construction
A wide range of contrustion options are offered using differing body and flap contructions derived from the following body and flap options.Ventilator body in the following formats:-
- Aluminium uninsulated
- Aluminium with insulation
- Aluminium with thermal break
- Aluminium uninsulated
- Aluminium with insulation
- Aluminium with insulation with thermal break
- Polycarbonate 16mm thick triple walled
- Polycarbonate 16mm thick triple walled with thermal break
Materials
Corrosion resistant AlMg3 aluminium alloy.Finishes
In addition to mill finish, also available is a polyester powder paint finish with a wide choice of colours and gloss levels.Controls
For smoke & heat release, and also for day-to-day environmental use if required.Pneumatic Enables connection to Life Safety, Smoke Detection and Building Management Systems.
Electric Actuation Enables connection to Life Safety, Smoke Detection and Building Management Systems.
Options
- Bird guards
- Insect mesh
- Acoustic damping up to 44dB